Collection: Toyota Prado Wheels

Nomad wheels suit the Toyota Prado 120 Series (2002 to 2009) and 150 Series (2009 to 2024), including the GX, GXL, VX and Kakadu. The Prado runs a 6x139.7 stud pattern, and every wheel in this collection is matched to it, in 17 and 18 inch.

A touring wagon that tows

The Prado is one of Australia's favourite touring wagons. It tows caravans, carries families and their gear, and covers long distances on everything from highways to outback tracks. Wheels on a Prado spend a lot of their life under load, so the load rating and tyre size matter as much as the look.

If you have a 250 Series Prado, contact us before ordering so we can confirm the fitment for your vehicle.

17 or 18 inch for the Toyota Prado

The 17x8.5 is the touring choice. More sidewall helps on corrugated roads, protects the rim and lets you lower tyre pressures off-road. It also gives you the widest choice of all-terrain tyres in the load ratings a towing Prado needs.

The 18x8.5 suits a Prado that is mostly driven on sealed roads. The shorter sidewall sharpens the steering and the bigger wheel fills the arch.

Choosing the offset

Nomad wheels come in +15 or +35 offset. The +35 sits closer to the factory position, while the +15 moves the wheel about 20mm further out for a wider stance. On a Prado that tows or carries a lot of gear, the +35 keeps the wheel closer to the factory position. The +15 suits a lifted Prado with larger tyres. If you are fitting wider tyres at the same time, decide on the tyre and the offset together. The wheel offset guide explains how it works, and the wheel offset calculator lets you compare setups.

Four designs, three finishes

Nomad makes four designs that suit the Toyota Prado. The N162 is a split-spoke wheel with a clean, aggressive look. The N232 has a patterned lip that dresses up the wheel on the street and in the scrub. The N133 and N811 both carry a beadlock-style outer ring for a tougher off-road look, with the tyre fitted the same way as any standard wheel. The N133, N162 and N232 come in 17x8.5 and 18x8.5, and the N811 comes in 17 inch only.

Every design comes in three finishes: Black Satin Lacquer, Black Machined Face Dark Tint and Silver Machined Face. Satin black suits a Prado with black bars and a roof rack, while Silver Machined Face works well on a lighter-coloured wagon. Whichever you choose, a pH-neutral wash keeps it looking right, and our alloy wheel cleaning guide covers what each finish needs.

After fitting

New wheels should be torqued to the vehicle maker's specification and checked again after the first short drive, because wheel nuts can settle as the wheel beds in against the hub. This matters more on a Toyota Prado that spends time on corrugations or carries weight. Our installation and maintenance guide sets out the torque and re-torque steps, and a set of wheel lock nuts is a simple way to protect a new set of wheels.

Building the Prado out further? Nomad also makes Prado accessories, including Prado side steps. To check fitment against other utes, see the stud pattern chart.

FAQs

Do Nomad wheels fit the 150 Series Prado?

Yes. Nomad wheels suit the 120 and 150 Series Prado with a 6x139.7 stud pattern.

Do Nomad wheels fit the 250 Series Prado?

Contact us first so we can confirm the fitment for the 250 Series.

Need a hand choosing? Contact the Nomad team and we'll help you pick the size and offset for your Toyota Prado. You can also browse the full range of Nomad 4x4 rims.