Prado Side Steps for the Toyota Prado 250
Share
The Prado 250 is a big step up from the 150 in more ways than one. Toyota gave it a squarer, more upright body, and it sits noticeably tall. For a wagon so often bought as a seven-seat family car, that matters: the people climbing in are as likely to be kids and grandparents as they are adults who don't mind a stretch.
The third row makes it more obvious. Anyone heading to the back has to get up into the second row first, and that means a high floor, a wide sill, and usually a hand on the door frame for balance. Wet shoes go onto the sill on the way in. Good trousers brush across it on the way out.
Prado side steps that power down when a door opens give everyone a proper step without fixing a board to the side of a brand-new wagon. Nomad has a kit for the Prado 250, and this page covers what it does, how it behaves day to day, and why it's a 250-only fitment.
How power side steps work
A step board sits along each side on hinged arms, moved by an electric motor. Open a door and the board on that side deploys out and down to a comfortable height. Close the door and the board folds back up under the body.
The Prado 250 listing gives the detail. Nomad specifies a heavy-duty electric motor driving die-cast aluminium components, with aluminium boards in a black anodised finish. Each side is rated to 300 kg, and the steps are rated for -40°C to 80°C, which covers anything an Australian touring wagon is likely to see.
For a wider look at electric running boards across different vehicles, see our guide to electric side steps in Australia.
What fits the Toyota Prado
Nomad's Prado kit is for the 250 Series only.
| Model | Years | Body style | Nomad kit |
|---|---|---|---|
| Prado 250 Series | 2024 on | Wagon | Nomad Power Side Steps – Toyota Prado 250 |
To be clear about it: the kit does not fit the Prado 150. The 250 is a completely different body, and Nomad doesn't make a kit for the 150 or earlier Prados. If you're shopping for Prado 250 side steps, you're in the right place; if you drive a 150, these aren't for you. The full range is on the Nomad electric side steps collection page.
What changes day to day
Getting into the second row becomes one low, easy step, which also makes the trip to the third row easier. That's the change families notice first.
The wagon's clearance is untouched. Retracted, the boards sit tucked up against the body rather than below the sill line, so the sides of the Prado are no lower than they were. Approach and departure angles are set by the bumpers and don't change. Breakover is where a fixed step usually hurts a 4WD, because it's the first thing to touch when the middle of the vehicle crests a ridge. With the step folded away, that isn't a concern.
It also suits the way a 250 gets loaded for a trip. With the doors open and bags going in and out of the second row, the board gives you somewhere solid to stand while you reach across, rather than balancing on the sill.
On a track the doors stay shut and so do the steps. If you stop beside a rock or a stump, look down before you open a door. The board will try to come out whether there's room or not.
After a beach trip or a muddy run, rinse the hinge arms. Sand and salt sitting in the pivots are what wear moving parts over time, and a quick hose keeps them working smoothly.
Power steps vs fixed steps on a Prado 250
Fixed side steps cost less and don't need wiring. For a Prado that never leaves the suburbs, they're a reasonable option.
A fixed step is permanent, though. It catches on ruts and rocks when you head off the bitumen, it fills with mud, and it sits at one height that tends to be too high for little kids and in the way for everyone else. It also changes the clean side profile that's a big part of the 250's appeal.
Power steps cost more and need wiring in, but they come down lower than a fixed step can sit and disappear when the doors close. On a family touring wagon, that's the better answer.
Fitting and what to expect
Nomad lists the Prado 250 kit as needing no drilling or cutting, and it comes with fitting instructions. The steps also need to be wired in so they respond to the doors. The 250 is a modern, electronically complex vehicle, so unless you're confident with that kind of wiring, book an auto electrician or 4x4 fitter.
Once fitted, cycle every door a few times to check both boards deploy and retract fully. The listing carries a 12-month warranty on the controller and motor and a lifetime structural warranty. General care notes for Nomad products are on our installation and maintenance page.
Common questions
Do these side steps fit the Prado 150?
No. The Nomad kit is made for the Prado 250 only.
Do the steps help with third-row access?
Indirectly. They make getting into the second row easier, which is the first step to reaching the third row.
How much weight can the steps take?
The Prado 250 listing rates them at 300 kg per side.
Will they affect off-road clearance?
No. They retract against the body while you drive, so they aren't the low point along the sill.