Collection: 4x4 Rims & Off-Road Wheels
4x4 rims have one job before any other: bolt up correctly and clear everything they need to clear. Nomad builds 4WD wheels in 17 inch and 18 inch to suit the utes and wagons Australians actually drive, in three finishes, with fitment listed by vehicle rather than left for you to work out.
Every wheel in this range is listed against the vehicles it suits. Pick your ute, pick your diameter, pick your finish.
Choosing 4x4 rims: 17 or 18 inch
Seventeen inch is the working size. For the same overall tyre diameter it leaves more sidewall between the road and the alloy, which matters on corrugations, protects the rim against potholes and rock strikes, and gives you room to drop pressures on sand without risking the bead. The 17 inch range is also where most serious all terrain and mud terrain tyres live, in the load ratings a loaded ute needs.
Eighteen inch suits a vehicle that spends most of its life on bitumen. Shorter sidewall sharpens the steering, and the larger wheel fills a modern dual cab arch properly.
If the vehicle tows, tours or works off the bitumen, start at 17. If it does not, the 18 will look better and cost you very little.
Finishes
Satin black is the low-maintenance option. It hides brake dust and red dust between washes, does not water spot, and pairs cleanly with black bars and badging.
Machined face cuts the raised surfaces bright so they catch light across the spokes, making the wheel read larger and more detailed. It sits under a clear lacquer that rewards a bit more care.
Dark tint keeps the machined detail at a lower brightness, which suits a 4WD that is not garaged.
Getting the fitment right
Diameter and finish are the visible decisions. Offset is the one that determines whether a rim actually fits. It is the distance from the mounting face to the wheel centreline, and it decides how far in or out the wheel sits under the guard. Push too far out and the tyre finds the guard lip under compression or at full lock.
If you are fitting wider tyres at the same time, choose the tyre and the offset together, because a wider tyre tightens the inner and outer clearance at once.
The four designs
Nomad makes four designs. The N162 is a split-spoke wheel with a clean, aggressive look, the N232 has a patterned lip, and the N133 and N811 carry a beadlock-style outer ring for a tougher off-road look. The N133, N162 and N232 come in 17x8.5 and 18x8.5, and the N811 comes in 17 inch only.
After fitting
New wheels should be torqued to the vehicle maker's specification and checked again after the first short drive, because wheel nuts can settle as the wheel beds in against the hub. This matters more on a 4WD that spends time on corrugations or carries weight. Our installation and maintenance guide sets out the torque and re-torque steps, and a set of wheel lock nuts is a simple way to protect a new set of wheels.
Find your vehicle
Fitment is listed per vehicle. Start with your ute or wagon and work from there rather than working backwards from a wheel you like the look of.
-
SaleN232
3 finishes
Regular price From $225.00 AUDRegular priceUnit price / per$324.00 AUDSale price From $225.00 AUDSale -
SaleN162
3 finishes
Regular price From $225.00 AUDRegular priceUnit price / per$324.00 AUDSale price From $225.00 AUDSale -
SaleN133
3 finishes
Regular price From $279.00 AUDRegular priceUnit price / per$349.00 AUDSale price From $279.00 AUDSale -