Ute & 4x4 Stud Pattern Chart: Ranger, Hilux, Triton, D-Max and More

When you are buying new wheels for a ute or 4WD, the stud pattern is one of the first things to check. If the stud pattern does not match the vehicle, the wheel will not fit.

The Ford Ranger, Toyota Hilux and Mitsubishi Triton all use a 6x139.7 stud pattern. This includes the N70 and N80 Hilux, the PX and Next Gen Ranger and the MQ, MR and MV Triton. However, the centre bore is different between these vehicles, so it is important to check this as well.

Running a 6x139.7 ute or 4WD?

Every Nomad wheel is 6x139.7 with a 106.1mm centre bore. Check your vehicle in the chart below, then shop wheels made to fit it.

Shop 6x139.7 Wheels →

Jump to: Ford Ranger stud pattern · Hilux stud pattern · Triton stud pattern · D-Max stud pattern

What Is a Stud Pattern?

A stud pattern is also called the PCD (pitch circle diameter) or bolt pattern. It has two numbers. The first is the number of studs and the second is the diameter of the circle the studs sit on, in millimetres. A 6x139.7 stud pattern has six studs on a 139.7mm circle. In imperial measurements, this is listed as 6x5.5.

The centre bore is the hole in the middle of the wheel that fits over the vehicle's hub. If the wheel's centre bore is the same as the hub, the wheel sits directly on the hub. If the centre bore is larger than the hub, the wheel can still fit, as long as the PCD, offset and width are right for the vehicle. If the centre bore is smaller than the hub, the wheel will not fit.

Stud Pattern and Centre Bore Chart

Vehicle Years / series Stud pattern Centre bore Fits a Nomad wheel?
Toyota Hilux N70 (2005-2015), N80 (2015 on) 6x139.7 106.1mm Yes, direct fit
Toyota Prado 120, 150 Series 6x139.7 106.1mm Yes, direct fit
Toyota Fortuner 2015 on 6x139.7 106.1mm Yes, direct fit
Ford Ranger PX1, PX2, PX3, Next Gen 6x139.7 93.1mm Yes
Ford Everest 2015 on 6x139.7 93.1mm Yes
VW Amarok 2023 on 6x139.7 93.1mm Yes
Mitsubishi Triton MQ, MR, MV 6x139.7 67.1mm Yes
Mitsubishi Pajero Sport 2015 on 6x139.7 67.1mm Yes
Isuzu D-Max / MU-X 2020 on 6x139.7 Contact us Yes
Mazda BT-50 2020 on 6x139.7 Contact us Yes
Holden Colorado RG 6x139.7 Contact us Yes
Nissan Patrol Y62 6x139.7 77.8mm Contact us first
Nissan Patrol GQ, GU 6x139.7 110mm No, hub is larger
Toyota LandCruiser 300 Series 6x139.7 95.1mm Contact us first
Nissan Navara D23 / NP300 6x114.3 66.1mm No, different PCD
VW Amarok 2010-2022 5x120 65.1mm No, different PCD

Shop wheels by vehicle

Found your stud pattern? Go straight to the Nomad wheels that fit your vehicle.

Ford RangerRanger RaptorFord EverestToyota HiluxToyota PradoToyota FortunerMitsubishi TritonPajero SportIsuzu D-MaxIsuzu MU-XMazda BT-50Holden ColoradoVW Amarok (2023 on)

Ford Ranger stud pattern

The Ford Ranger uses a 6x139.7 stud pattern with a 93.1mm centre bore. That covers the PX1, PX2, PX3 and the Next Gen Ranger, and the Ford Everest uses the same stud pattern and centre bore. Nomad wheels are 6x139.7 and are listed for every Ranger in that range. See Ford Ranger wheels.

Hilux stud pattern

The Toyota Hilux uses a 6x139.7 stud pattern with a 106.1mm centre bore. That applies to the N70 (2005 to 2015) and the N80 (2015 on). The Prado 120 and 150 Series and the Fortuner share the same stud pattern and centre bore. Nomad wheels also have a 106.1mm centre bore, so they are a direct fit on all three. See Toyota Hilux wheels.

Triton stud pattern

The Mitsubishi Triton uses a 6x139.7 stud pattern with a 67.1mm centre bore, across the MQ, MR and MV models. The Pajero Sport (2015 on) uses the same stud pattern and centre bore. Nomad wheels are listed for the Triton and Pajero Sport. See Mitsubishi Triton wheels.

D-Max stud pattern

The Isuzu D-Max uses a 6x139.7 stud pattern, and so does the MU-X, which shares its platform. The 2020-on Mazda BT-50 is built on the same platform and also uses 6x139.7. For the centre bore on your D-Max or MU-X, contact the Nomad team with your vehicle details before you order. See Isuzu D-Max wheels.

How to Check Your Stud Pattern

First, count the number of studs. On a six-stud wheel, measure from the centre of one stud to the centre of the stud directly opposite. If the measurement is close to 139.7mm, the vehicle has a 6x139.7 stud pattern.

To check the centre bore, remove the wheel and measure across the hub with vernier callipers. You can also check the vehicle specifications or contact us with your vehicle details.

Choosing Wheels for Your Vehicle

All Nomad wheels have a 6x139.7 stud pattern and a 106.1mm centre bore. On the Hilux, Prado and Fortuner, this is a direct fit. Nomad wheels also fit the Ranger, Everest, Triton and the other 6x139.7 vehicles in the chart above. The offset, width and load rating should also be checked before ordering.

You can browse our 6x139.7 wheels, Ford Ranger wheels or Toyota Hilux wheels online, or contact the Nomad team for help with fitment.

FAQs

What is the stud pattern on a Ford Ranger?

The Ford Ranger uses a 6x139.7 stud pattern with a 93.1mm centre bore. This applies to the PX1, PX2, PX3 and Next Gen Ranger.

What is the stud pattern on a Toyota Hilux?

The Toyota Hilux uses a 6x139.7 stud pattern with a 106.1mm centre bore. This includes the N70 and N80 Hilux.

What is the stud pattern on a Mitsubishi Triton?

The Mitsubishi Triton uses a 6x139.7 stud pattern with a 67.1mm centre bore.

Do Ranger wheels fit a Hilux?

Both vehicles use a 6x139.7 stud pattern, but the centre bore is different. Wheels made for the Ranger's 93.1mm hub will not fit over the Hilux's 106.1mm hub. Wheels with a 106.1mm centre bore, such as Nomad wheels, fit both vehicles.

Back to blog