Collection: 6x139.7 Wheels
6x139.7 is one of the most common stud patterns on Australian utes and 4WDs. It means the wheel has six studs on a 139.7mm circle, and in imperial measurements it is listed as 6x5.5. Every Nomad wheel is made with a 6x139.7 stud pattern.
Vehicles that use 6x139.7
The 6x139.7 pattern is used on the Toyota Hilux, Prado and Fortuner, the Ford Ranger and Everest, the 2023-on VW Amarok, the Isuzu D-Max and MU-X, the Mazda BT-50, the Mitsubishi Triton and Pajero Sport, and the Holden Colorado. Nomad wheels are also listed for the LandCruiser 300 Series, Patrol Y62, GWM Cannon and Tank 300, BYD Shark 6, Kia Tasman, RAM 1500 and Silverado 1500.
If you're not sure which pattern your vehicle uses, check our stud pattern chart before you order.
Stud pattern is only the start
A wheel with the right stud pattern won't automatically fit every vehicle that uses it. The centre bore, offset, width, brake clearance and load rating all need to suit the vehicle as well. That's why Nomad wheels are listed by vehicle, and each one is matched to the vehicle it is sold for.
Offset decides how far in or out the wheel sits under the guard. Nomad wheels come in +15 or +35. The +35 sits closer to the factory position and suits a standard-height vehicle, while the +15 moves the wheel about 20mm further out for a wider stance on a lifted 4WD. The wheel offset guide explains how it works.
Sizes
Nomad wheels come in 17x8.5 and 18x8.5. The 17 inch leaves more tyre sidewall, which helps on corrugations and rocky tracks and lets you lower tyre pressures on sand. The 18 inch suits a vehicle that is mostly driven on sealed roads, with sharper steering and a bigger wheel in the arch. If your 4WD tows, tours or works off the bitumen, start with the 17.
Designs and finishes
The range covers four designs. The N162 is a split-spoke wheel, the N232 has a patterned lip, and the N133 and N811 carry a beadlock-style outer ring (the N811 comes in 17 inch only). Each comes in Black Satin Lacquer, Black Machined Face Dark Tint and Silver Machined Face.
Load rating
Utes and 4WDs often carry far more weight than a passenger car, especially with a canopy, a camper, a full tray or a van on the back. A wheel needs a load rating that suits the vehicle at its loaded weight, not just its empty weight. Nomad wheels are load rated for the vehicles they are listed for, and the tyres you fit should be rated to match. When you set up a 4WD for towing or touring, check the load rating of both the wheel and the tyre before you order.
Shop by vehicle
The easiest way to find the right wheel is to start with your vehicle. Choose your make and model from the menu, or browse the full Nomad wheel range and filter by size and finish. Add a set of wheel lock nuts to protect your new wheels.
FAQs
Is 6x139.7 the same as 6x5.5?
Yes. 6x139.7 is the metric measurement and 6x5.5 is the imperial measurement of the same stud pattern.
Will any 6x139.7 wheel fit my ute?
Not necessarily. The centre bore, offset, width and load rating also need to suit your vehicle, which is why Nomad wheels are listed by vehicle.
Need a hand? Contact the Nomad team with your make and model.
-
SaleN232
3 finishes
Regular price From $225.00 AUDRegular priceUnit price / per$324.00 AUDSale price From $225.00 AUDSale -
SaleN162
3 finishes
Regular price From $225.00 AUDRegular priceUnit price / per$324.00 AUDSale price From $225.00 AUDSale -
SaleN133
3 finishes
Regular price From $279.00 AUDRegular priceUnit price / per$349.00 AUDSale price From $279.00 AUDSale -