Collection: GWM Cannon Wheels
Nomad wheels suit the GWM Cannon and Cannon Alpha in 17 and 18 inch. They are load rated to suit both models and matched to the Cannon's 6x139.7 stud pattern.
Work ute or family ute
The Cannon and Cannon Alpha are used as work utes and family vehicles across Australia. Aftermarket wheels change the look of the ute and let you run a different tyre setup for work, touring or off-road driving.
The Cannon Alpha is the larger of the two, and it suits a bigger wheel. Whichever model you have, choose the wheel and tyre together so the package suits the way you use the ute.
17 or 18 inch for the GWM Cannon
The 17x8.5 suits a Cannon used for work or off-road driving. More sidewall gives better comfort when loaded, better rim protection and a wider choice of tyres.
The 18x8.5 suits the larger Cannon Alpha and any Cannon that is mostly driven on sealed roads.
Choosing the offset
Nomad wheels come in +15 or +35 offset. The +35 sits closer to the factory position, while the +15 moves the wheel about 20mm further out for a wider stance. The +35 sits closer to the factory position. The +15 gives a wider stance with larger tyres. If you are fitting wider tyres at the same time, decide on the tyre and the offset together. The wheel offset guide explains how it works, and the wheel offset calculator lets you compare setups.
Four designs, three finishes
Nomad makes four designs that suit the GWM Cannon. The N162 is a split-spoke wheel with a clean, aggressive look. The N232 has a patterned lip that dresses up the wheel on the street and in the scrub. The N133 and N811 both carry a beadlock-style outer ring for a tougher off-road look, with the tyre fitted the same way as any standard wheel. The N133, N162 and N232 come in 17x8.5 and 18x8.5, and the N811 comes in 17 inch only.
Every design comes in three finishes: Black Satin Lacquer, Black Machined Face Dark Tint and Silver Machined Face. Satin black suits a work Cannon, while Silver Machined Face brightens up the Cannon Alpha. Whichever you choose, a pH-neutral wash keeps it looking right, and our alloy wheel cleaning guide covers what each finish needs.
After fitting
New wheels should be torqued to the vehicle maker's specification and checked again after the first short drive, because wheel nuts can settle as the wheel beds in against the hub. This matters more on a GWM Cannon that spends time on corrugations or carries weight. Our installation and maintenance guide sets out the torque and re-torque steps, and a set of wheel lock nuts is a simple way to protect a new set of wheels.
Building the GWM Cannon out further? Nomad also makes GWM Cannon accessories, including GWM Cannon side steps and a GWM Cannon tonneau cover. To check fitment against other utes, see the stud pattern chart.
FAQs
Do Nomad wheels fit the Cannon Alpha?
Yes. Nomad wheels are load rated to suit both the Cannon and the Cannon Alpha.
Which size suits the Cannon Alpha?
The 18 inch suits the larger Cannon Alpha well, while the 17 inch gives more sidewall off-road.
Need a hand choosing? Contact the Nomad team and we'll help you pick the size and offset for your GWM Cannon. You can also browse the full range of Nomad 4x4 rims.
-
SaleN232
3 finishes
Regular price From $225.00 AUDRegular priceUnit price / per$324.00 AUDSale price From $225.00 AUDSale -
SaleN162
3 finishes
Regular price From $225.00 AUDRegular priceUnit price / per$324.00 AUDSale price From $225.00 AUDSale -
SaleN133
3 finishes
Regular price From $279.00 AUDRegular priceUnit price / per$349.00 AUDSale price From $279.00 AUDSale -