GWM Cannon Side Steps for the Dual Cab Ute
Share
The GWM Cannon arrived as the value pick of the dual cab market and ended up as plenty of families' first ute. It's a big, comfortable thing with a cab that sits tall, and the people riding in it are often kids and grandparents rather than tradies.
That's where the step-in height shows. Little ones climb up with hands and knees. Older passengers grab the door frame. And on a wet day, every shoe that goes in leaves a mark on the sill and lower door.
GWM Cannon side steps that power down when a door opens give everyone a proper step without bolting a fixed board under the doors. Nomad has a kit for the Cannon, and this page covers how it works, what it changes day to day, and how it compares with a fixed step.
How power side steps work
Each side has a step board on hinged arms, driven by an electric motor. Open a door and the board on that side swings out and down. Close it and the board folds back up under the body.
There's nothing to press. Nomad describes the range as deploying when you open your door and retracting when it closes, without giving up ground clearance or off-road performance. On a ute that gets taken camping and down dirt roads, that matters.
For a wider comparison of electric running boards across different vehicles, see our guide to electric side steps in Australia.
What fits the GWM Cannon
Nomad has one kit for the Cannon.
| Model | Body style | Nomad kit |
|---|---|---|
| GWM Cannon | Dual cab | Nomad Power Side Steps – GWM Cannon |
GWM has added variants such as the Cannon Alpha to the range, which is a larger ute. If you're unsure whether the kit suits your Cannon, send us your build details and we'll confirm before you order. The full range is on the Nomad electric side steps collection page.
If you're also covering the tub, our GWM Cannon tonneau cover guide goes through the options for the back of the ute.
What changes day to day
Getting in becomes one easy step. On a Cannon that's been lifted and fitted with bigger tyres, that's the change the whole family notices first.
Clearance stays as GWM set it. With the boards retracted, they sit up against the body rather than below the sill line, so the sides of the ute are no lower than they were. Approach and departure angles come from the bumpers and don't change. Ramp-over is where a fixed step costs you, because it's often the first thing to scrape when the middle of the ute crosses a crest.
On a track, doors stay shut and so do the steps. If you stop next to a rock or a log, look before you open the door, because the board will try to deploy regardless.
In the wet, boots land on the board rather than the paint. After a beach drive or a muddy track, hose out the hinge arms so sand and salt don't sit in the pivots.
For a ute that also tows a camper or a boat, there's a small extra benefit. Hitching up means climbing in and out of the cab several times, often on uneven ground at a ramp or campsite, and a low step that's there the moment a door opens makes that a little easier.
The Cannon's tub is also worth a mention. With a rear door open, the board gives you a solid spot to stand while you reach over the tub rail for a bag or an esky, rather than stretching up from the ground. On a ute that does camping trips, where gear goes in and out of the back seat and the tub all weekend, that small convenience comes up more often than you'd think.
Power steps vs fixed steps on a Cannon
Fixed steps are cheaper and need no wiring. On a Cannon that sticks to sealed roads, they do the job.
They're also permanent. A fixed board catches on ruts and rocks, packs up with mud, and on a lifted ute often sits too high to help small kids anyway.
Power steps cost more and need wiring in, but they come down lower than a fixed step can sit and then tuck away. For a dual cab doing family duty and weekend camping, that's the better trade.
Fitting and what to expect
The steps need to be wired into the vehicle so they respond to the doors. If you're confident with automotive wiring, it's a job you can do at home; otherwise an auto electrician or 4x4 fitter will get it done properly.
Once fitted, open and close each door a few times and check both boards deploy and retract fully. General care advice for Nomad products is on our installation and maintenance page.
Common questions
Do these steps fit the Cannon Alpha?
Send us your build details and we'll confirm. The Alpha is a larger ute than the standard Cannon.
Do power side steps reduce ground clearance?
Not the way a fixed step does. They retract against the body while you drive, so they aren't the lowest point along the sill.
Are side steps and running boards the same?
For most buyers, yes. The Nomad kit is a powered board that only comes out when a door opens.
Can I fit them myself?
If you're confident with automotive wiring. Otherwise an auto electrician or 4x4 fitter is the safer option.