Collection: Mitsubishi Pajero Wheels
Nomad wheels suit the Mitsubishi Pajero in 17 and 18 inch. They are load rated to suit the Pajero and matched to its 6x139.7 stud pattern.
A touring 4WD that's still going
The Pajero is no longer sold new in Australia, but plenty are still used for touring and off-road driving. New wheels are one of the most common upgrades for an older Pajero, either to replace tired factory wheels or to fit a new set of all-terrain tyres.
On an older 4WD, it is worth checking the hubs and studs while the old wheels are off, before the new set goes on.
17 or 18 inch for the Mitsubishi Pajero
The 17x8.5 is often chosen for touring because it leaves more tyre sidewall. That helps on corrugated roads, protects the rim and lets you lower tyre pressures off-road.
The 18x8.5 suits a Pajero that is mostly driven on sealed roads, with a sharper steering feel and a bigger wheel in the arch.
Choosing the offset
Nomad wheels come in +15 or +35 offset. The +35 sits closer to the factory position, while the +15 moves the wheel about 20mm further out for a wider stance. The +35 sits closer to the factory position. The +15 gives a wider stance with larger tyres. If you are fitting wider tyres at the same time, decide on the tyre and the offset together. The wheel offset guide explains how it works, and the wheel offset calculator lets you compare setups.
Four designs, three finishes
Nomad makes four designs that suit the Mitsubishi Pajero. The N162 is a split-spoke wheel with a clean, aggressive look. The N232 has a patterned lip that dresses up the wheel on the street and in the scrub. The N133 and N811 both carry a beadlock-style outer ring for a tougher off-road look, with the tyre fitted the same way as any standard wheel. The N133, N162 and N232 come in 17x8.5 and 18x8.5, and the N811 comes in 17 inch only.
Every design comes in three finishes: Black Satin Lacquer, Black Machined Face Dark Tint and Silver Machined Face. Satin black looks deliberate on an older 4WD, while the machined faces can lift faded paint. Whichever you choose, a pH-neutral wash keeps it looking right, and our alloy wheel cleaning guide covers what each finish needs.
After fitting
New wheels should be torqued to the vehicle maker's specification and checked again after the first short drive, because wheel nuts can settle as the wheel beds in against the hub. This matters more on a Mitsubishi Pajero that spends time on corrugations or carries weight. Our installation and maintenance guide sets out the torque and re-torque steps, and a set of wheel lock nuts is a simple way to protect a new set of wheels.
To check fitment against other utes, see the stud pattern chart.
FAQs
Do Nomad wheels fit the Pajero?
Yes. Nomad wheels are load rated to suit the Mitsubishi Pajero, with a 6x139.7 stud pattern.
Which size suits a touring Pajero?
The 17 inch, for the extra sidewall on rough roads.
Need a hand choosing? Contact the Nomad team and we'll help you pick the size and offset for your Mitsubishi Pajero. You can also browse the full range of Nomad 4x4 rims.
-
SaleN232
3 finishes
Regular price From $225.00 AUDRegular priceUnit price / per$324.00 AUDSale price From $225.00 AUDSale -
SaleN162
3 finishes
Regular price From $225.00 AUDRegular priceUnit price / per$324.00 AUDSale price From $225.00 AUDSale -
SaleN133
3 finishes
Regular price From $279.00 AUDRegular priceUnit price / per$349.00 AUDSale price From $279.00 AUDSale -