Collection: BYD Shark 6 Wheels
Nomad wheels suit the BYD Shark 6 plug-in hybrid ute in 17 and 18 inch. The Shark 6 runs a 6x139.7 stud pattern, and every wheel in this collection is matched to it.
A heavier ute needs the right load rating
The Shark 6 carries a battery pack, which makes it heavier than many diesel utes. That puts the load rating at the centre of the wheel choice, alongside the size and the look. Each order is checked against the vehicle before it is sent.
Owners change wheels on a Shark 6 to give it a tougher look, to fit all-terrain tyres, or to set it up for touring. The right wheel and tyre package can make a big difference to how it looks and drives off the bitumen.
17 or 18 inch for the BYD Shark 6
The 17x8.5 allows more tyre sidewall, which suits a Shark 6 that goes off the bitumen and gives a more off-road look.
The 18x8.5 keeps a size closer to the factory setup and suits a Shark 6 that is mostly driven on sealed roads.
Choosing the offset
Nomad wheels come in +15 or +35 offset. The +35 sits closer to the factory position, while the +15 moves the wheel about 20mm further out for a wider stance. The +35 sits closer to the factory position. The +15 gives a wider stance with larger tyres. If you are fitting wider tyres at the same time, decide on the tyre and the offset together. The wheel offset guide explains how it works, and the wheel offset calculator lets you compare setups.
Four designs, three finishes
Nomad makes four designs that suit the BYD Shark 6. The N162 is a split-spoke wheel with a clean, aggressive look. The N232 has a patterned lip that dresses up the wheel on the street and in the scrub. The N133 and N811 both carry a beadlock-style outer ring for a tougher off-road look, with the tyre fitted the same way as any standard wheel. The N133, N162 and N232 come in 17x8.5 and 18x8.5, and the N811 comes in 17 inch only.
Every design comes in three finishes: Black Satin Lacquer, Black Machined Face Dark Tint and Silver Machined Face. Satin black suits the Shark 6's modern styling, while Silver Machined Face brightens up a darker colour. Whichever you choose, a pH-neutral wash keeps it looking right, and our alloy wheel cleaning guide covers what each finish needs.
After fitting
New wheels should be torqued to the vehicle maker's specification and checked again after the first short drive, because wheel nuts can settle as the wheel beds in against the hub. This matters more on a BYD Shark 6 that spends time on corrugations or carries weight. Our installation and maintenance guide sets out the torque and re-torque steps, and a set of wheel lock nuts is a simple way to protect a new set of wheels.
Building the BYD Shark 6 out further? Nomad also makes BYD Shark 6 accessories, including a BYD Shark 6 tonneau cover. To check fitment against other utes, see the stud pattern chart.
FAQs
Do Nomad wheels fit the BYD Shark 6?
Yes. Nomad wheels suit the Shark 6 with a 6x139.7 stud pattern.
Why does load rating matter on the Shark 6?
The battery pack makes it heavier than many utes, so the wheels and tyres need to be rated for that weight.
Need a hand choosing? Contact the Nomad team and we'll help you pick the size and offset for your BYD Shark 6. You can also browse the full range of Nomad 4x4 rims.
-
SaleN232
3 finishes
Regular price From $225.00 AUDRegular priceUnit price / per$324.00 AUDSale price From $225.00 AUDSale