Collection: Beadlock-Style 4x4 Wheels
Beadlock wheels are a popular choice on 4WDs and utes because of their tough, off-road look. Nomad's beadlock-style range includes the N133 and N811. Both have an outer ring design that gives the wheel a rugged look, while the tyre is fitted the same way as on any standard wheel.
Beadlock vs beadlock-style
A true beadlock wheel clamps the tyre bead between two rings, so the tyre stays on the rim at very low pressures. These wheels are mainly built for competition and are generally not approved for use on registered road vehicles in Australia. They also need their ring bolts checked and tightened regularly.
A beadlock-style wheel has the same look without the clamping ring. There are no ring bolts to check, and the tyre is fitted and balanced like any other wheel. That makes it the practical choice for a 4WD that is driven on the road as well as off it.
The N133 and N811
The N133 is a six-spoke beadlock-style wheel available in 17x8.5 and 18x8.5. The N811 is a beadlock-style design available in 17 inch only. Both come with a 6x139.7 stud pattern and a choice of +15 or +35 offset, in Black Satin Lacquer, Black Machined Face Dark Tint and Silver Machined Face.
Which vehicles they suit
The beadlock-style range suits the Toyota Hilux, Prado and Fortuner, the Ford Ranger and Everest, the Isuzu D-Max and MU-X, the Mazda BT-50, the Mitsubishi Triton and other 6x139.7 vehicles. The look works especially well on boxier 4WDs like the GWM Tank 300 and on off-road pickups like the Silverado Trail Boss and ZR2.
Size and offset
The 17 inch leaves more tyre sidewall for touring and off-road driving, and it suits the beadlock-style look best on most utes. The 18 inch suits a vehicle that spends more time on sealed roads. The +35 offset sits closer to the factory position, while the +15 moves the wheel about 20mm further out for a wider stance. The wheel offset calculator lets you compare setups.
Why choose a beadlock-style wheel
For most owners, the appeal is the look. The outer ring gives a 4WD a purpose-built, off-road stance that a plain spoke wheel doesn't. It also pairs well with chunky all-terrain and mud-terrain tyres, and it suits builds with bar work, flares and a lift. Because the tyre is fitted like any standard wheel, any tyre shop can fit and balance it, and you can lower tyre pressures for sand and rocks the same way you would on any other wheel. If you want the off-road look without the upkeep of a true beadlock, this is the way to get it.
Looking after them
A beadlock-style ring has more edges than a plain wheel, so it can collect mud and dust. A soft brush and a pH-neutral wheel cleaner keep it looking right, and our alloy wheel cleaning guide covers each finish.
FAQs
Are beadlock-style wheels road legal?
Beadlock-style wheels don't clamp the tyre bead, so they are fitted and used like a standard wheel.
Do I need to check ring bolts?
No. Unlike a true beadlock, a beadlock-style wheel has no ring bolts to check or tighten.
Need a hand choosing? Contact the Nomad team, or browse the full Nomad wheel range.
-
SaleN133
3 finishes
Regular price From $279.00 AUDRegular priceUnit price / per$349.00 AUDSale price From $279.00 AUDSale -