Silverado Side Steps for the Chevrolet Silverado 1500
Share
Next to an Australian ute, a Silverado 1500 is enormous. The bonnet is at chest height for most adults, the cab floor sits well above the knee, and the crew cab's rear doors open onto a climb that has kids looking for something to grab.
Owners usually find this out on the first weekend. Partners who were happy enough stepping into a Ranger now need a hand. Older passengers want a grab handle and a moment to plan. And with work boots or wet shoes, the sill takes a beating every time someone gets in.
Silverado side steps that power down with the door give everyone a sensible first step without bolting a permanent board along the side of a very long truck. Nomad has a kit for the Silverado 1500, and this page covers how it works, how it handles everyday use, and how it compares with fixed running boards.
How power side steps work
Each side has a long step board on hinged arms, driven by an electric motor. Open any door and the board on that side swings out and down. Close it and the board retracts back up under the body. Nothing to press, nothing to fold.
The Silverado listing spells out the hardware. Nomad specifies a heavy-duty electric motor driving die-cast aluminium components, with aluminium boards in a black anodised finish. Each side is rated to 300 kg, and the steps are rated for temperatures from -40°C to 80°C.
If you'd like the broader picture on electric running boards, our guide to electric side steps in Australia covers how they compare across vehicles.
What fits the Chevrolet Silverado
Nomad has one kit for the Silverado 1500.
| Model | Years | Nomad kit |
|---|---|---|
| Chevrolet Silverado 1500 | 2020 on | Nomad Power Side Steps – Chevrolet Silverado 1500 20on |
Most Silverados sold in Australia are crew cabs, and that's what most owners fitting Silverado 1500 electric side steps are running. The ZR2 is a Silverado 1500 too, but it rides higher and carries its own off-road trim, so if you have a ZR2 or another trim you're unsure about, send us your build details and we'll confirm the fit before you order. The larger 2500 HD isn't covered by this kit. The rest of the range is on the Nomad electric side steps collection page.
What changes day to day
On a truck this tall, a step that comes down to a sensible height makes a bigger difference than on almost anything else. Getting in becomes one easy movement instead of a climb, and the kids stop needing a lift into the back seat.
Ground clearance is left alone. With the boards retracted, they sit up against the body rather than hanging below the rocker panel, so the sides of the truck aren't any lower than before. Approach and departure angles come from the bumpers and don't change. The long wheelbase already makes breakover the Silverado's weak point off-road, and a fixed board makes it worse, because it's the first thing to touch when the middle of the truck crests a hump. A retracted step stays out of that.
On a track the doors are shut and the steps stay up. If you stop next to a rock or a log, check before opening the door, because the step will try to deploy regardless.
In the wet, boots land on the board rather than on the paint. After a beach drive or a muddy track, hose out the hinge arms. Sand and salt are what wear the pivots, and a rinse after each trip keeps them moving freely.
Power steps vs fixed running boards on a Silverado
Fixed running boards are the common choice on American pickups, and they're cheaper with nothing to wire. On a Silverado that only does highway kilometres and towing, they work.
The problem is that a fixed board on a truck this long is a lot of metal hanging off the side permanently. It's the part that catches on ruts and rocks and fills with mud, and at one fixed height it's often still a stretch for smaller passengers.
Silverado 1500 electric running boards cost more and need wiring in, but they come down lower than a fixed board can sit and then tuck away. For a truck that does family duty, towing and the odd dirt road, they're the better choice.
Fitting and what to expect
Nomad lists the Silverado kit as needing no drilling or cutting, and it comes with full fitting instructions. The steps also need to be wired in so they respond to the doors. If that isn't your area, book an auto electrician or 4x4 fitter.
After fitting, cycle each door a few times to confirm both boards deploy and retract fully. The listing carries a 12-month warranty on the controller and motor and a lifetime structural warranty. General care advice for Nomad products is on our installation and maintenance page.
Common questions
Do these steps fit the Silverado ZR2?
The ZR2 is a Silverado 1500, but it rides higher and has its own trim. Send us your build details and we'll confirm before you order.
Do they fit the Silverado 2500 HD?
No. The Nomad Silverado kit is for the 1500.
How much weight can the steps carry?
The Silverado listing rates them at 300 kg per side.
Will power running boards affect towing or off-road use?
They retract against the body while you drive, so they stay out of the way on the highway with a van behind you and on a rutted track alike.