Kia Tasman Side Steps That Fold Away Until You Need Them
Share
The Kia Tasman is Kia's first proper ute, and it arrived with a squared-off, upright body that sits tall even in its standard form. Owners who have come out of an SUV or a people mover tend to notice it the first week. The rear doors are big, the floor is high, and the step up from the kerb is further than the brochure photos suggest.
Plenty of Tasman buyers are using it as the family car as well as the work ute. That means kids climbing into the back after school, a parent who doesn't love hauling themselves up by the grab handle, and you, stepping out in boots that have just walked across a muddy site. The sill and lower door take the punishment.
Kia Tasman side steps that power down when a door opens solve the climb without hanging a fixed board off a brand-new ute. Nomad has a kit made for the Tasman, and this page covers how it works, what it changes in daily use, and how it compares with a fixed step or a set of Kia Tasman running boards.
How power side steps work
On each side there's a step board on hinged arms, moved by an electric motor. Open any door and the board on that side swings out and down to a comfortable height. Close it and the board pulls back up under the body, out of sight.
You don't press anything or fold anything. Nomad describes the range as deploying when you open your door and retracting when it closes, without sacrificing ground clearance or off-road performance. On a new ute that you'd rather keep looking the way Kia designed it, that disappearing act is most of the appeal.
Our guide to electric side steps in Australia covers the category more broadly if you're comparing options across different vehicles.
What fits the Kia Tasman
Nomad has one kit for the Tasman.
| Model | Years | Nomad kit |
|---|---|---|
| Kia Tasman | 2025 on | Nomad Power Side Steps – Kia Tasman |
The Tasman is sold in more than one cab style, and most owners fitting steps are running the dual cab pickup. If yours is a king cab or a cab chassis, get in touch with us before ordering so we can confirm the fit for your body. The rest of the range is on the Nomad electric side steps collection page.
What changes day to day
The first change is simple. Everyone gets in with one step instead of a climb, and they stop grabbing at the door frame to do it.
The second is that nothing is left hanging off the side of the ute. Retracted, the boards tuck up against the body rather than sitting below the sill line, so the sides of the Tasman are no lower than they were. Approach and departure angles are decided by the bumpers and don't change. Ramp-over, the angle that matters when the middle of the ute crosses a crest or a washout, is where a fixed step usually costs you, because it's the first thing to touch. Folded away, it isn't part of the picture.
On a track the doors are shut and the steps stay up. It's still worth getting into the habit of glancing down before you open a door when you've stopped next to a rock or a stump. The step will try to deploy whether there's room for it or not.
Wet weather is where the step pays for itself. Boots land on the board, not on the paint, and trousers stay clean getting out. After a beach run or a muddy weekend, hose out the hinge arms so sand and salt don't sit in the pivots.
Power steps vs fixed steps on a Tasman
A fixed step costs less, has nothing to wire and does the basic job. If your Tasman spends its life on sealed roads and you're not fussed about how it looks, it's a reasonable choice.
For plenty of Tasman buyers the look matters, though. Kia gave the ute a clean, boxy side profile, and a fixed board running along the bottom of it changes that. A fixed step also catches on ruts, fills with mud, and on a lifted ute often sits too high to help the kids anyway.
Kia Tasman running boards that deploy electrically cost more and need wiring in, but they come down lower than a fixed step can sit and then disappear. For a dual cab doing family duty during the week and dirt roads on the weekend, they make more sense.
Fitting and what to expect
The steps need to be wired into the vehicle so they respond to the doors. The Tasman is a new, electronically busy vehicle, so unless you're confident with modern automotive wiring, have an auto electrician or 4x4 fitter do the job.
Once fitted, open and close every door a few times and watch both boards deploy and retract fully. After that, keep the arms clean and they shouldn't need much attention. General care advice for Nomad products is on our installation and maintenance page.
Common questions
Are there side steps made specifically for the Kia Tasman?
Yes. Nomad has a dedicated Tasman kit rather than a universal step adapted to fit.
Will Kia Tasman side steps fit every cab style?
Most owners fitting them run the dual cab. If you have a king cab or cab chassis, contact us with your build details before ordering.
Do power side steps reduce ground clearance?
Not the way a fixed step does. They retract against the body while you drive, so they aren't the lowest point along the sill.
What's the difference between side steps and running boards?
Mostly the name. Running boards usually describes a longer, flatter board, and the Nomad kit is a powered board along the side of the cab that only comes out when a door opens.